Bridgestone R156 295/80R22.5 Commercial All-Position Tire

Bridgestone R156 295/80R22.5 All-Position Commercial Tire | 152/148M

Product Overview

The Bridgestone R156, also known as the V-STEEL RIB R156, is a commercial all-position radial tire built for line-haul and regional trucking, available here in size 295/80R22.5 with a 152/148M load index and speed rating. It’s a radial, tubeless construction, engineered by Bridgestone with an emphasis on long tread life, resistance to rib-punch wear, and steering response for all-position highway service.

Bridgestone designed the R156 around a rib-focused tread pattern intended to minimize irregular wear while supporting the steering and handling demands of all-position use on line-haul and regional routes. Fleet managers, owner-operators, and commercial garages sourcing a 295/80R22.5 all-position radial for highway-duty trucks are the primary audience for this size and pattern.

Key Benefits

• Optimized rib distribution designed to help minimize irregular wear across the tread
• Groove Fence technology designed to reduce road noise
• Stone ejectors designed to reduce stone drilling and the casing damage it can cause
• Radial, tubeless construction suited to all-position highway and regional service
• Tread pattern built to support steering response in all-position applications
• Engineered for long tread life under line-haul and regional duty cycles

Performance & Driving Experience

Wear resistance and handling: The optimized rib distribution is intended to reduce irregular and rib-punch wear, while the rib-based tread design is built to support responsive steering in all-position use.

Casing protection: Stone ejectors are designed to help clear stones from the tread before they can drill into the casing, supporting tire longevity over the service life of the tire.

Ride quality: Groove Fence technology is designed to reduce road noise, which is relevant for line-haul and regional operators covering extended highway miles.

Fleet duty cycle: As an all-position commercial tire, the R156 is built around Bridgestone’s stated priorities for this line: long tread life, wear resistance, and steering performance under highway and regional operating conditions.

Technical Specifications

M+S and 3PMSF winter certifications, and run-flat capability, are not confirmed for this listing.

Understanding the Tire Size

295/80R22.5 breaks down as follows:

• 295 — the tire’s section width in millimeters, measured sidewall to sidewall.
• 80 — the aspect ratio, meaning the sidewall height is 80% of the section width.
• R — radial construction, indicating the internal body plies run radially across the tire.
• 22.5 — the wheel/rim diameter in inches the tire is designed to mount on.

The 152/148 in the load index/speed rating designation reflects certified load-carrying capacity per tire — 152 for single mounting and 148 for dual mounting — at the tire’s rated inflation pressure, as defined by the load index standard. The M speed rating corresponds to a maximum certified speed as defined by that speed symbol. This tire is a tubeless radial designed to mount on a 9.00″ recommended rim width.

Vehicle & Application Suitability

The Bridgestone R156 in 295/80R22.5 is built for:

• Commercial trucks in all-position use (steer, drive, or trailer, per fleet spec)
• Line-haul and regional-haul trucking operations
• General-cargo fleets and container trucks
• Fuel and oil haulers
• Highway bus operators

Confirm fitment by matching this size, load index/speed rating, and recommended rim width to your vehicle or axle manufacturer’s specifications, along with wheel compatibility.

Who Should Consider This Tire?

This tire is worth considering if you’re:

• A fleet manager or owner-operator specifying an all-position radial for 22.5-wheel commercial trucks
• Running line-haul or regional-haul routes where tread life and rib-punch wear resistance matter
• Operating general-cargo, container, fuel/oil, or highway bus fleets on highway-duty routes
• A garage or reseller sourcing all-position commercial radials for fleet customers

If you need a tire specifically rated for severe snow service or a confirmed M+S rating, verify those certifications directly, as they are not confirmed for this listing. If you need a different wheel diameter or a tire built for a different duty cycle, this specific listing may not be the right match — confirm your requirements before ordering.

Tire Size & Fitment Guidance

Before ordering, confirm the following against your vehicle or axle specifications:

• Tire size: 295/80R22.5
• Load index/speed rating: 152/148M
• Recommended rim width: 9.00″
• Wheel/rim compatibility for a 22.5-inch diameter
• Intended position (all-position use, per your fleet’s configuration)
• Your fleet’s operating conditions and load requirements

If you’re replacing an existing tire, matching the current size, load index, and rim width helps preserve intended handling and load-carrying characteristics.

Warranty & Purchase Confidence

Eligible purchases from Siam Tires Export may be covered by our 70,000-mile limited warranty. Review the applicable warranty terms for coverage and conditions before purchase.

Siam Tires Export supports international delivery and works with individual buyers, fleets, garages, and bulk/wholesale purchasers on commercial truck tire orders. Contact our team for current pricing, availability, and delivery details for your order.

Frequently Asked Questions

What does the 295/80R22.5 size mean? 295 is the section width in millimeters, 80 is the aspect ratio (sidewall height as a percentage of width), and 22.5 is the wheel diameter in inches the tire is built to fit.

What does the 152/148M load index/speed rating mean? 152 and 148 correspond to certified maximum load-carrying capacity per tire in single and dual mounting respectively, and M corresponds to a maximum certified speed as defined by the speed rating standard.

Is this tire suitable for winter driving? M+S and 3PMSF certifications are not confirmed for this tire. If winter traction certification is a requirement, verify directly before ordering.

What position is this tire designed for? It’s specified as an all-position commercial truck tire, suitable for use across steer, drive, or trailer positions depending on fleet configuration.

What technologies does this tire use? The R156 features optimized rib distribution to help minimize irregular wear, Groove Fence technology to reduce road noise, and stone ejectors to reduce stone drilling.

Does Siam Tires Export offer bulk or fleet orders? Yes, we work with fleets, businesses, and bulk/wholesale buyers on commercial tire orders. Contact us for details specific to your order size.

What warranty applies to this tire? Eligible purchases may be covered by Siam Tires Export’s 70,000-mile limited warranty. Review the applicable terms for coverage and conditions.

How do I know if this tire fits my truck? Confirm the tire size, load index/speed rating, recommended rim width, and intended position against your vehicle or fleet manufacturer’s specifications before ordering.